Fluorescent material is a type of material that emits light when it is exposed to specific wavelengths of light. It is commonly used in high-visibility clothing, such as safety vests, jackets, and pants. Fluorescent materials are typically made from synthetic dyes or pigments that are designed to absorb light in the ultraviolet range and emit light in the visible spectrum. Flu Yellow, Flu orange, and Flu Lime are commonly used fluorescent colors in safety clothing because they are highly visible and provide good contrast against most backgrounds. Fluorescent materials are effective in increasing visibility because they absorb and reflect more light than non-fluorescent materials, making them appear brighter and more visible in low light conditions. However, it’s important to note that fluorescent materials may lose their effectiveness over time due to exposure to UV light and other environmental factors. Regular inspection and replacement of safety clothing made with fluorescent materials is important to ensure that they continue to provide the necessary level of visibility and protection.
Class 2 reflective tape is a type of reflective tape used for high-visibility safety garments that require a moderate level of visibility. It is designed to provide increased visibility in low-light conditions and to help workers or users stand out in hazardous environments.
Class 2 reflective tape is typically made from retroreflective material, which is composed of tiny glass beads or prisms that reflect light back to its source. This material is sewn onto safety garments, such as vests or jackets, and is available in a variety of colors, including yellow, orange, and red.
To meet the requirements for Class 2 reflective tape, the tape must meet certain minimum specifications, including a minimum width of 1.375 inches and a minimum reflective area of 201 square inches. It is also required to have a minimum level of retroreflectivity, which is measured in candelas per square meter (cd/m²).
Class 2 reflective tape is typically used in environments where there is moderate traffic or complex backgrounds, such as construction sites, parking lots, and roadway maintenance. It provides a higher level of visibility than Class 1 reflective tape and is suitable for workers who need to be seen from greater distances or in darker conditions.
It is important to ensure that safety garments with Class 2 reflective tape meet regulatory standards, such as EN ISO 20471:2013 for high-visibility clothing, to ensure that they provide the necessary level of safety and protection.
When choosing a reflective tape type for safety garments, it is important to consider several factors to ensure that the tape provides the required level of visibility and safety. Here are some factors to consider:
By considering these factors, you can choose a reflective tape type that is best suited for your safety garment and provides the required level of visibility and safety.
ANSI/ISEA 107-2020 is a standard developed by the American National Standards Institute (ANSI) and the International Safety Equipment Association (ISEA) that outlines the requirements for high-visibility safety apparel (HVSA) used in a variety of work environments, including construction, road work, and emergency response.
The standard specifies the minimum amount of visible background and reflective material that must be present on safety vests, jackets, and other clothing items in order to maximize visibility and safety for workers. It also outlines the performance requirements for the reflective material, including its ability to maintain its reflective properties after exposure to wear, tear, and weather.
The latest version of the standard, ANSI/ISEA 107-2020, includes several updates and changes from the previous version, including new definitions for key terms, updated performance requirements for reflective material, and a new classification system for HVSA based on the type of work environment in which it will be used.
Adherence to the ANSI/ISEA 107-2020 standard is important for ensuring that high-visibility safety apparel meets the necessary safety and visibility requirements for a given work environment. Employers and safety professionals should consult the standard and work with reputable suppliers to ensure that their HVSA meets the necessary standards and regulations.
EN ISO 20471:2013 is a European standard that outlines the requirements for high-visibility clothing, also known as “hi-vis” or “reflective” clothing. The standard applies to clothing worn in environments where there is a risk of low light conditions, such as in construction sites, road works, and other outdoor work environments.
The standard specifies the minimum amount and positioning of reflective materials that must be used on the clothing, as well as requirements for the background material color and other design features. The reflective materials used in the clothing must meet certain performance criteria, including minimum levels of retroreflection, which is the ability of the material to reflect light back towards the source.
Controlling quality is a critical aspect of running a successful business, and it is especially important when it comes to manufacturing and selling safety products. Here are some steps we take to control the quality of our products:
Establish clear quality standards: Before production begins, we established clear quality standards that define the required specifications for the high visibility clothing. This includes details such as the materials used, the reflective tape placement, the stitching and seams, and the overall fit and function of the garment.
Conduct regular inspections: During production, we conduct regular inspections to ensure that the quality standards are being met. This can include both visual inspections and functional testing to verify that the safety garments meet the necessary safety requirements.
Implement a quality control system: A company should implement a quality control system that monitors the production process and identifies any issues or defects in the vests. This can include using statistical process control methods to track production metrics and identify areas for improvement.
Train employees on quality control: All employees involved in the production and inspection of safety garments are trained on the quality standards and control procedures. This can include training on visual inspection techniques, functional testing methods, and how to identify and report defects or issues.
Conduct third-party testing: In addition to internal quality control measures, LSA can also conduct third-party testing to verify the quality. This can involve sending samples of the vests to an independent testing laboratory to verify that they meet the necessary safety standards.
LSA warrants all clothing to be free of defects in material or workmanship for a period of ninety (90) days from the original date of purchase. The apparel warranty covers defect of workmanship and materials, but does not cover damage caused by accident, improper care, negligence, normal wear and tear, or the natural breakdown of colors and material through time, exposure or extensive use.
We accept TT 30% deposit in advance, balance paid after copy Bill of Loading.
Or to be discussed.
It will be around 40days after all confirmed for regular orders.